1962-64 Ford Galaxie 500 - Adapt Hurst shifter to stock (Without Spacer Ring)

 
This is an adapter for your 1962, 1963 or 1964 Galaxie Hust Shifter linkage to use your stock shifter. This may work for many other makes and models as many are similar. This adapter should also work for the same years Fairlane for example.
 
This listing is similar to our other listing but DOES NOT INCLUDE the spacer ring or associated hardware for it. This adapter is designed to keep the shifter height similar to stock rather than to raise it up. It will be slightly more to the passenger side than stock (less than an inch).
 
This kit includes new grade 8 bolts, washers and lock washers
 
The adapter bracket is milled from a solid block of steel, and has a cold blue finish. All parts are made here in the USA.
 
There is one minor modification to your existing tunnel cover that may be required. This works with both the original tunnel covers and the ones sold from Buds. However, you may need to trim a very small amount of material out of the bottom right of the existing hole to allow for smooth shifting into 4th gear. This can easily be accomplished with a Dremel or even a hand file as the amount of material is minimal.
 
Please feel free to reach out if you have questions! Attached pictures are installed in a 1963 console car that has been running this design for 20+ years. 
 
Does NOT include vehicle or any other vehicle parts in the pictures. You will need your own Hurst Shifter linkage and stock shift lever. Only parts listed above are included. 
 
*NOTE* If our other product includes an adapter ring to keep the shift boot from rubbing against the shift hardware or bracket, increasing the lifespan of those shift boots (which are more difficult to replace). Please see our other listing for more information.